How to cut the grating frame cover of finished tree pool?
Release time:
2020-03-01
The so-called finished grate refers to the fiberglass grid plate with the thickness of 25 mm and the aperture of 38 times 38 mm, which is made of unsaturated resin and fiberglass through the molding p
The so-called finished grate refers to the fiberglass grid plate with the thickness of 25 mm and the aperture of 38 times 38 mm, which is made of unsaturated resin and fiberglass through the molding process.
The finished tree grate is a glass fiber reinforced plastic grille installed in the tree pit, with regular spaces arranged on it, so that the water can pass through. Its main function is to protect the trees, at the same time, it is also easy to pass through the water and facilitate border irrigation. FRP grate has the characteristics of strong anti-corrosion and good use effect. It uses a composite material, mainly composed of resin and fiberglass.
The finished tree grate is a uniformly distributed grid structure, which can be made according to the situation of various trees that have not been planted or have been planted, so as to solve the problem of uncertain position of trees in the tree pool. Here is a detailed introduction to the cutting method of the finished tree pool grate frame cover plate:
1、 Measure the length and width of the tree pit. According to the measurement size of the tree pit, use two pieces of grates to splice together;
2、 Measure the diameter of the tree. According to the measured diameter of the tree, cut the center of the two grates with a cutter. Make sure that the box in the middle of the grate in the tree pool is more than 10 cm larger than the diameter of the tree. This is because the tree has to grow.
3、 The cover plate of special-shaped tree pool grate tree frame can also be combined by four grid plates;
4、 The grate shall be connected with a clamp between fiberglass gratings, and the bottom shall be truly leveled to prevent suspension and affect the use effect of the grate.
When cutting the tree holes, the finished fiberglass grate shall be cut along the grid wall, so as to cut off the edge stubble, which is relatively beautiful as a whole. After the installation, it is necessary to check whether it is parallel to the sidewalk ground, so as to avoid the occurrence of unsafe factors of pedestrian tripping.
Related News
Official WeChat Public Number
All
- All
- Product Management
- News
- Introduction
- Enterprise outlets
- FAQ
- Enterprise Video
- Enterprise Atlas