Rules for setting up of glass reinforced septic tanks for residential products

Release time:

2019-12-31

The finished glass reinforced septic tank is a small sewage treatment system, including the water tank and the septic system. When the sewage enters the water tank, the bacteria will decompose the sewage without oxygen, and reduce the volume of solid waste. After sedimentation, the sewage will be discharged, and the water pollution will be reduced.

Septic tanks shall be set up for all buildings in the residential area. Septic tanks can be set up separately according to buildings, or one or more septic tanks can be set up at appropriate positions in the residential area. The setting of finished glass reinforced septic tanks in the residential area shall meet the following requirements:

1. The finished glass reinforced septic tank should be set at the downstream end of the household connecting pipe, so as to facilitate the cleaning of motor vehicles.

2. The outer wall of the finished glass reinforced septic tank shall not be less than 5m from the outer wall of the building, and shall not affect the building foundation, and shall not be less than 30m from the underground water intake structure, and shall not be less than 10m from the underground water storage facilities.

3. The finished product glass reinforced septic tank shall be equipped with vent pipe, and the manhole shall be sealed with double-layer well cover. When the septic tank is set in the building due to the restrictions of conditions, ventilation, deodorization and explosion-proof measures shall be taken.

4. When using the product glass reinforced septic tank in residential quarter, the product quality certification shall be provided, and the service life shall be equivalent to the design life of the building. When it cannot meet the requirements, reliable renewal and transformation measures shall be taken.

The finished product of the residential quarter is resistant to dampness, acid and alkali, oxidation, temperature and deformation. It has been used for more than 50 years. The device can be assembled according to the demand of the site. The device can be put into use within two hours. The barrel body of the glass reinforced septic tank is made of high-strength acid and alkali resistant materials such as glass fiber and organic resin. It has good sealing performance and won't be caused by foundation settlement The breakage and scum layer in the tank caused by this problem solved the problem that the brick septic tank polluted the groundwater, and ensured the reliable operation of the septic tank and the function of loathing of oxidized dung.

Official WeChat Public Number

All

All
Product Management
News
Introduction
Enterprise outlets
FAQ
Enterprise Video
Enterprise Atlas

business license