Two methods of connecting and fixing the cover grid of shared tree pool
Release time:
2019-12-30
he grid of tree pool cover plate can make the roots of trees loose and absorb water and other nutrients to protect the water and soil loss of trees. The main body of tree pool cover plate is made up o
he grid of tree pool cover plate can make the roots of trees loose and absorb water and other nutrients to protect the water and soil loss of trees. The main body of tree pool cover plate is made up of two or four plates, with tree holes in the middle and seepage holes around. It is installed in the tree pit with good water permeability and permeability, which is convenient for the growth of trees. It can be cut and installed according to the characteristics of tree pit and trees.
When installing the treetop cover grid, pay attention to the middle treetop slightly larger. After all, the trees still need to grow. When cutting the treetop, it's better to cut along the grid wall, so that the stubble can be cut off, and the installation effect is more beautiful. Here's how to connect and fix the treetop cover:
1. Use C-type fastener: C-type fastener is made of stainless steel. It is the same as the English letter C. It is fastened at the junction of two tree pool cover plates, and the screws can be screwed down from top to bottom.
2. Use screws to pierce: This requires that the junction of the two tree pool covers are provided with grid walls. After drilling, the screws can be put on and tightened.
FRP tree pool cover plate is produced by mold, that is to say, its size is fixed, commonly used for 1 × 4m and 1.22 × 3.66M two kinds, different sizes of tree pits need different sizes, installation personnel can cut into the size of tree pits according to the needs, generally small angle grinder can be used for cutting.
Related News
Official WeChat Public Number
- All
- Product Management
- News
- Introduction
- Enterprise outlets
- FAQ
- Enterprise Video
- Enterprise Atlas