Surface Types and Applicable Situations of FRP Grids
Release time:
2019-07-10
The appearance of FRP grille is mesh distribution. The grid design provides the force-bearing capacity for FRP grille.
The appearance of FRP grille is mesh distribution. The grid design provides the force-bearing capacity for FRP grille. The color of the grille is yellow, green, red, grey, blue, white and other colors. According to its surface type and thickness, it is suitable for different occasions. Here, the surface type effect of FRP grille is introduced emphatically.
1. Groove type: It is an economical and general type of FRP grille. When producing FRP grille, it needs to be moulded, so crescent groove will appear on the surface. The crescent surface of itself can have anti-skid effect, and the anti-skid and wear-resistant effect is general. This kind of surface type grille can be used as factory corridor. Patrol and inspect aisle board and other places.
2. Sanding overlay type: It is divided into sand-laying in the mould and sand-laying outside the mould. It is necessary to determine which sand-laying method to use according to the specific use situation. The fabrication method is to add quartz sand on the surface of FRP grille, which is used in places with high protection requirements, especially in wet, oily or frozen environment, such as bridge deck, floor, trench board, car wash room, etc.
3. Microporous double-layer cross type: The common specifications of microporous cross grids are 19X19/38X38, 25X25/50X50, that is to say, the single-cell size of the lower layer is 38X38 or 50X50mm, and the single-cell size of the upper layer is 19X19 or 25X25mm. Due to the reduction of the opening rate, the chances of dangerous goods falling through the grid holes at high altitude can be reduced, and the chances of dangerous goods falling through the grid holes at high altitude can be reduced, which can be applied in high altitude walkways and other areas.
4. Planar type: It is a kind of grille produced by surface grinding on the basis of the original FRP grille. It is a kind of grille with smooth surface on both sides. The smooth grille is non-skid. It is mainly used in building decoration, machine walkway, fence, fence and other fields.
5. Patterned cover: Its surface can be flat, mirror-machined, diamond-shaped anti-skid surface, and sand-added anti-skid surface. The fabrication method is to add a 2 cm or 3 cm cover on the basis of the grille. The surface type of FRP grille is suitable for preventing small tools or objects from falling through the grille holes to the bottom, or blocking the odor of the underground, as well as the vehicle aisle.
Above is a summary of the effect of surface types of FRP grids. FRP grids have various specifications and models, which can meet the different requirements of load-bearing, skid-proof and wear-resistant in different occasions.
Related News
Official WeChat Public Number
- All
- Product Management
- News
- Introduction
- Enterprise outlets
- FAQ
- Enterprise Video
- Enterprise Atlas